Gypsum board to gypsum as the main raw material, adding fiber, adhesive, modifier, by mixing and pressing, drying. grinding limestone production line is a light, high strength, fire, sound insulation, thermal insulation, good stability, small shrinkage, non-aging, anti-moth-eaten new lightweight sheet. At present, the gypsum board has been widely used in residential, office buildings, shops, hotels and industrial buildings and other buildings within the wall, wall cladding panels, ceilings, sound-absorbing panels, ground boards and a variety of decorative panels. Our company in the gypsum milling has many advantages, our high-pressure milling machine is a very good gypsum mill. The high-pressure milling machine, desulfurization effect is remarkable, easy to operate. But also from the investment, power consumption, wearing parts wear, material moisture adaptability, etc., is the current level of technology and process conditions, the most ideal milling machine. Improve energy efficiency of the system, reduce production costs and improve the quality of the concentrate effective, for enterprises to create greater profit margins, the overall increase in the development and utilization of mineral resources efficiency.
Gypsum Block Production Line is gypsum ultrafine processing industry must-choose equipment. Our company through gypsum application examples, improve their equipment, production of high standards of finished products to help customers solve the solid waste, the production of gypsum, gypsum powder to reduce production costs in the processing of gypsum powder has an unparalleled advantage, the 21st century gypsum powder factory Processing preferred milling machine manufacturers. By promoting the continuous advancement of milling machine technology, it solves the problems of backward performance and high production cost, and promotes the new development of gypsum milling.
First of all, large natural gypsum with a vibrating feeder evenly transported to the jaw crusher for primary crushing; through the shaker sieve, the size of the material in Stone Quarrying Process Line with the requirements of the material transported to the grinding mill grinding, does not meet the requirements Of the return jaw crusher re-processing, the general control of the material size is not greater than 30mm. After gypsum grinding through the mill to the required fineness, was sent to the boiling furnace for calcination, particle size does not meet the requirements of the return to the mill to continue grinding, calcined qualified gypsum powder into the clinker warehouse storage or into the product workshop . The above is a brief introduction of the gypsum powder production line, the equipment used in the production line are: vibrating feeder, jaw crusher, gypsum mill, vibrating screen, belt conveyor, dust collector and other equipment.