Inkbird ITC-308S Dual Relay Digital Temperature Controller Thermostat for Heating & Cooling Device Pre-wired Sensor Probe (ITC-308S + 12″ stainless long NTC sensor)

Inkbird ITC-308S Dual Relay Digital Temperature Controller Thermostat for Heating & Cooling Device Pre-wired Sensor Probe (ITC-308S + 12″ stainless long NTC sensor)

Bullet Point:
Ideal for beer wine making, fermetation, reptile heat mat, aquarium light lamps, bulbs, fans ect.
Easy to use,plug your heater/fans in the sockets, set the target temperatures, then it goes.
NTC Temperature Sensor 12in Stainless Steel Probe with 6.5ft DC cord
The Inkbird temperature probe can be submersed into your beer direclty during fermentation.
No need to worry about inserting a smaller probe into a separate thermowell temperature probe.
The Inkbird 30cm long sensor is compatible with INKBIRD’s following controllers: ITC-308S,ITC-306T,ITC-310T.
Measuring temperature range: -50℃~120℃
Probe Material:Stainless steel
Probe Dimensions: 6mm x 300mm (0.24in x 12in)
Cord Length (excluding probe): 2m (6.5ft)

Specification:
Temperature control range -50 ~ 99 ° C / -58 ~ 210 ° F
Temperature resolution 0.1 ° C / 0.1 ° F
Temperature accuracy of ± 1 ° C (-50 ~ 70 ° C) / ± 1 ° F (-50 to 160 ° F)
Temp Control mode on / off control, heating and cooling
Input 100 ~ 240VAC, 50Hz / 60Hz
Temperature Control output max. 10A, 100V ~ 240V AC
Alarm high and low temperature alarm
Relay contact capacity cooling (10A, 100-240VAC)
Heating (10A, 100-240VAC)
Input power cable length 1.5 m (5 ft)
Output Power cable length 30 cm (1 ft)
Dimension body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm (3.3×1.7x1inch)
Ambient temperature -30 ~ 75 ° C / -22 ~ 167 ° F
Storage temperature -20 ~ 60 ° C / -4 ~ 140 ° F
Humidity 20 ~ 85%

The package includes:
1x Inkbird ITC-308S plug temperature controller thermostat
1x 12″ 30cm Stainless long sensor probe
1x User manual in English

Product Features

  • 【Wide Range】 Food grade stainless steel probe temperature range is -50~99 °C / -58~210 ° F with high accuracy: ± 1 ° C (-50 ~ 70 ° C) / ± 1 ° F (-50 to 160 ° F) . Dual display window are displayed in a position to the measured temperature and set temperature simultaneously.
  • 【Plug-and-play design】Easy to use, just plug into your heating/cooling devices and set the target temperature, then it works, NO WIRING.
  • 【2 Sockets Outputs】With 2 sockets output, one for heating and another one for cooling. Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.Also, compressor delay protection for compressor control.
  • 【Temperature Alarms】Protect your fish with a safe and healthy environment, With high and low temperature alarms,sensor fault alarm,over temperature alarm.
  • 【Warm Tips】Waterproof IP68 NTC probe but the controller isn’t Waterproof, can submerge sensor probe into fish tank, but please don’t submerge controller in water. 🙂

0
Like
Save

Comments

%d bloggers like this: